PLASTIC PACKAGE MOISTURE INDUCED CRACKING Search Results

MIL-D-3464 type 1

Abstract: MIL-D-3464 MIL-D-3464 type 1 and 2 MILD-3464 MIL-D3464 Furnace
Contextual Info: Plastic Package Moisture-Induced Cracking Introduction With the older “through-hole” technology packages such as the Dual In-line Package DIP , soldering to printed circuit boards was accomplished using a wave solder. The DIP leads went through holes in the printed circuit board, where

JEDEC J-STD-033b

Abstract: MIL-D-3464 type 1 MIL-D-3464 MIL-D-3464 type 1 and 2 J-STD-033B MIL-B-81705 MILD-3464 LEAD FRAME SURFACE MOUNT QFP JEDEC tray MIL-D-3464 type 2
Contextual Info: Plastic Package Moisture-Induced Cracking Introduction Problem Summary With the older “through-hole” technology packages such as the Dual In-line Package DIP , soldering to printed circuit boards was accomplished using a wave solder. The DIP leads went through holes in the printed circuit board, where

kc 2462

Abstract: ED36 symposium ED-36 gunn diode datasheet Betel d 1878 transistors A102
Contextual Info: ADI Reliability Handbook Table XII. 1200 ؎500 ppm 38 @ 90% C.I. ELFR FIT Rate No Failures Occurred in Other Stress Tests Conducted, e.g., HAST, T/C, etc. The ppm figure obtained in Table XII was at the time of qualification and based on a limited sample size. Recent figures based on statistically valid sample sizes indicate that the ELFR is running at less

CQ208

Abstract: CQFP 208 datasheet CERAMIC QUAD FLATPACK CQFP CF160 CERAMIC PIN GRID ARRAY 120 pins TQFP Package 44 lead PB256 PF100 PF144 PL84
Contextual Info: HIGHLIGHTS For plastic packages, QuickLogic offers surface-mount packaging in PLCC Plastic Leaded Chip Carrier and PQFP packages. The PQFP (Plastic Quad Flatpack) comes in two categories, TQFP (Thin Quad Flatpack) and PQFP. The TQFP package has a nominal thickness of only

CERAMIC QUAD FLATPACK CQFP 14 pin

Abstract: CF160 CERAMIC PIN GRID ARRAY CPGA CERAMIC QUAD FLATPACK CQFP CQ208 CF100 PF100 PF144 PL84 PQ208
Contextual Info: pASIC DEVICE Packaging Specifications HIGHLIGHTS For plastic packages, QuickLogic offers surface-mount packaging in PLCC Plastic Leaded Chip Carrier and PQFP packages. The PQFP (Plastic Quad Flatpack) comes in two categories, TQFP (Thin Quad Flatpack) and PQFP.

G004

Abstract: ipc-sm-786A MIL-STD-81075 MIL-D-3464 IPC-4202 JESD22-A113 GUIDELINES FOR HANDLING MOISTURE SENSITIVE DEVICE IPC-SM-786 research and development procedure in electronics industry P-21373
Contextual Info: MOISTURE CONTROL MEASURES for Epoxy Encapsulated Surface Mount Magnetic Components Extending Pulse’s Commitment to a Quality Partnership 1996, Pulse Engineering, Inc. G004 EXECUTIVE SUMMARY The Situation Over the past decade, the transition from through-hole to SMT production techniques has revealed quality

ipc-sm-786A

Contextual Info: DataSource CD-ROM Q1-02 Contents Packaging and Thermal Characteristics Package Drawings Thermal Application Note Package Information Package Electrical Characterization Component Mass by Package Type Thermally Enhanced Packaging Moisture Sensitivity Tape and Reel

200B

Abstract: AN598 DK-2750 RG41 popcorn defect analysis to-220
Contextual Info: AN598 Plastic Packaging and the Effects of Surface Mount Soldering Techniques Author: John Barber Surface Mount Technology Team PURPOSE This application note is intended to inform and assist the customers of Microchip Technology Inc. with Surface Mount Devices SMD’s . The process of

tm 1628 smd

Abstract: AN598 78610 3002 ic equivalent cte table epoxy IC 3004 200B hear HEINEMANN
Contextual Info: AN598 Plastic Packaging and the Effects of Surface Mount Soldering Techniques Author: John Barber Surface Mount Technology Team PURPOSE This application note is intended to inform and assist the customers of Microchip Technology Inc. with Surface Mount Devices SMD’s . The process of

Contextual Info: TECHNICAL INFORMATION ASSEMBLY INDUCED DEFECTS by John Maxwell AVX Corporation Abstract: Surface mount technology holds many benefits but there is no room for sloppy practices; SMT assemblies need the control that semiconductor processing uses. Extreme care must be taken at

G017

Abstract: als244c hipotted IPC-TP-787 perkin cte table E5007 IPC-SM-786 PE-68051 PE-69037
Contextual Info: OPTIMIZING SOLDER JOINT RELIABILITY for Surface Mount Magnetic Components Pulse’s Mechanical Design for Thermal Expansion and Optimal Lead Compliance Deliver Empirically-Measurable Solder Joint Reliability 1998, Pulse Engineering, Inc. G017.A © 1998, Pulse Engineering, Inc.

water jet cutting machine circuit

Contextual Info: TECHNICAL INFORMATION ASSEMBLY INDUCED DEFECTS by John Maxwell AVX Corporation Abstract: Surface mount technology holds many benefits but there is no room for sloppy practices; SMT assemblies need the control that semiconductor processing uses. Extreme care must be taken at

AN1260

Abstract: A112 A113
Contextual Info: MOTOROLA Order this document by AN1260/D SEMICONDUCTOR TECHNICAL DATA AN1260 Storage and Handling of Drypacked Surface Mounted Devices SMD Prepared by: R. Kampa, D. Hagen, W. Lindsay, and K.C. Brown INTRODUCTION This information provides Motorola customers with the

Moisture Sensitivity Levels MICROCHIP PIC Package

Abstract: 78610 delamination leadframe barber excursion AN598
Contextual Info: AN598 Plastic Packaging and the Effects of Surface Mount Soldering Techniques Author: John Barber Surface Mount Technology Team PURPOSE This application note is intended to inform and assist the customers of Microchip Technology Inc. with Surface Mount Devices SMD’s . The process of

1n4733 smd

Abstract: moisture during operation triac scr schematic AN599 capacitors coefficient of thermal expansion soft solder die bonding TP2222A triac triggering ic DS00598A-page Triac soft turn on
Contextual Info: AN598 Plastic Packaging and the Effects of Surface Mount Soldering Techniques Author: John Barber Surface Mount Technology Team PURPOSE This application note is intended to inform and assist the customers of Microchip Technology Inc. with Surface Mount Devices SMD’s . The process of

g28 SOT23

Abstract: weston 461 st 95160 9418 transistor TO-92 9742 9943 so-8 9418 transistor 9806 9928 f56 dd pack m
Contextual Info: CONTENTS October 2000 OPERATING LIFE TEST SUMMARY . 2 HAST . 3 AUTOCLAVE TEST . 4

AN2639

Abstract: top-side marking STMicroelectronics LQFP SM817 TOPSIDE MARKING PDIP STMicroelectronics AN2034 J-STD-020D J-STD-020d.1 disadvantages of microcontroller JESD22A111 VFQFPN thermal resistance
Contextual Info: AN2639 Application note Soldering recommendations and package information for Lead-free ECOPACK microcontrollers Introduction STMicroelectronics microcontrollers support various types of Lead-free ECOPACK® package to meet customer requirements. The mounting technologies are Surface mount technology SMT , and Through hole

Contextual Info: TECHNICAL NOTES Reliability Electrostatic Discharge ESD CP Clare devices are electrostatic discharge (ESD) sensitive and it is necessary to take specific precautions in order to ensure protection from damage that may be induced by ESD. We follow all precautions identified in

footprint jedec MS-026 TQFP

Abstract: JEDEC MS-026 footprint qfp 64 0.5 mm pitch land pattern fine BGA thermal profile schematic impulse sealer HQ208 PQ100 land pattern QFP 208 PQ208 TQ100
Contextual Info: Packages and Thermal Characteristics R February 2, 1999 Version 2.1 11* Package Information Inches vs. Millimeters The JEDEC standards for PLCC, CQFP, and PGA packages define package dimensions in inches. The lead spacing is specified as 25, 50, or 100 mils (0.025", 0.050" or

schematic impulse sealer

Abstract: XC4010E-PQ208 JEDEC Package Code MS-026-AED XC4013E-PQ240 JEDEC MS-026 footprint MS-026-ACB footprint jedec MS-026 TQFP 128 XC4013E-BG225 PG299-XC4025E bav 21 diode
Contextual Info: Packages and Thermal Characteristics R February 2, 1999 Version 2.1 11* Package Information Inches vs. Millimeters The JEDEC standards for PLCC, CQFP, and PGA packages define package dimensions in inches. The lead spacing is specified as 25, 50, or 100 mils (0.025", 0.050" or

JEDEC Package Code MS-026-AED

Abstract: EFTEC-64 schematic impulse sealer footprint jedec MS-026 TQFP PQ-208 footprint jedec MS-026 TQFP 128 QFP PACKAGE thermal resistance die down EIA standards 481 ipc-sm-786A VQ44
Contextual Info: • Packages and Thermal Characteristics  November 20, 1997 Version 2.0 10* Package Information Inches vs. Millimeters The JEDEC standards for PLCC, CQFP, and PGA packages define package dimensions in inches. The lead spacing is specified as 25, 50, or 100 mils (0.025", 0.050" or

AD8488

Contextual Info: Reliability Handbook UG-311 One Technology Way • P.O. Box 9106 • Norwood, MA 02062-9106, U.S.A. • Tel: 781.329.4700 • Fax: 781.461.3113 • www.analog.com Reliability Handbook INTRODUCTION Analog Devices, Inc., would like to thank its customers for making Analog Devices a leading supplier of high quality LSI, VLSI, and ULSI

JESD-26

Abstract: RAI-5-039 mineral spirits bulk modulus Silicone mold release agent JESD-22 KITAGAWA MINERAL SPIRITS
Contextual Info: Package Reliability All products and packages offered by National Semiconductor Corporation meet the minimum reliability qualification requirements outlined in Table 1 and Table 2 for hermetic and plastic packages, respectively. These minimum requirements are applied to new packages as well as to existing

schematic impulse sealer

Abstract: qfp 64 0.4 mm pitch land pattern Rotron pk100 power supply XC4013E-PQ240 EFTEC-64 XC4010E-PQ208 MO-151-AAN-1 PK100 land pattern for TSOP 2 86 PIN
Contextual Info: Packages and Thermal Characteristics: High-Reliability Products R 0 5 PK100 v1.0 June 15, 2000 Package Information Inches vs. Millimeters The JEDEC standards for PLCC, CQFP, and PGA packages define package dimensions in inches. The lead spacing is specified as 25, 50, or 100 mils (0.025", 0.050" or 0.100").