D4B-0081N
Abstract: D4B-3A16N D4B-1111N D4B-2111N D4B-5111N PT 4115 D4B-4A11N D4B-1116N 1a87 D4B-2100N
Text: Safety Limit Switch D4B-@N CSM_D4B-_N_DS_E_5_1 Snap-action contact with certified direct opening operation certification . Maintenance, seal, and resistance to shock increased and direct opening mechanism added. Three-conduit switches and 2NC switches are also available.
|
Original
|
|
PDF
|
D4B-4115N
Abstract: D4B-2100N D4B-0005N D4B-5115N D4B-1A15N D4B-0010N 2-14NPT D4B-4171N 3181-N D4B-71N
Text: Safety Limit Switch D4B-@N CSM_D4B-_N_DS_E_5_1 Snap-action contact with certified direct opening operation certification . Maintenance, seal, and resistance to shock increased and direct opening mechanism added. Three-conduit switches and 2NC switches are also available.
|
Original
|
D4B-2111N
D4B-2100N
D4B-0010N
D4B-0001N
D4B-4115N
D4B-2100N
D4B-0005N
D4B-5115N
D4B-1A15N
D4B-0010N
2-14NPT
D4B-4171N
3181-N
D4B-71N
|
PDF
|
D4B-6181N
Abstract: D4B-0005N
Text: Safety Limit Switch D4B-@N CSM_D4B-_N_DS_E_2_1 Snap-action contact with certified direct opening operation certification . Maintenance, seal, and resistance to shock increased and direct opening mechanism added. Three-conduit switches and 2NC switches are also available.
|
Original
|
|
PDF
|
07474
Abstract: No abstract text available
Text: Pen Pocket Opening ESD Protective Symbol Imprinted SPECIFICATIONS: 1" Material Properties: Card Pocket Opening 5-13/16" • • • • • • • Dissipative Polyvinylchloride PVC Material Thickness: 0.012" (1S) front & back Material Tolerance (thickness): +/-10%
|
Original
|
STM11
07474
|
PDF
|
4511N
Abstract: D4b-4111 D4B-8111N D4B-4115N D4B-1181N 2111N D4B-1A11N 2A15 D4B-5116N D4B-2A16N
Text: Safety Limit Switch D4B-@N CSM_D4B-_N_DS_E_4_1 Snap-action contact with certified direct opening operation certification . Maintenance, seal, and resistance to shock increased and direct opening mechanism added. Three-conduit switches and 2NC switches are also available.
|
Original
|
|
PDF
|
circuit diagram of door lock system
Abstract: electronic security door lock circuit circuit diagram of door interlock system iec269 interlock solenoid LC1 contactor omron water level motor control wiring diagram pull type solenoid coils using of damper in Horizontal Output Transistor E76675
Text: D4BL Locking Safety-Door Switch Protective Doors Are Locked Until Machines Completely Stop Operating H The switch contact is opened by a positive opening mechanism NC contacts only . Positive opening mechanism that is EN-approved is indicated by on the switch
|
Original
|
EN60529,
IEC529)
EN1088
EN60947-5-1
R9451050
circuit diagram of door lock system
electronic security door lock circuit
circuit diagram of door interlock system
iec269
interlock solenoid
LC1 contactor
omron water level motor control wiring diagram
pull type solenoid coils
using of damper in Horizontal Output Transistor
E76675
|
PDF
|
Untitled
Abstract: No abstract text available
Text: Safety Limit Switch D4B-@N CSM_D4B-_N_DS_E_5_1 Snap-action contact with certified direct opening operation certification . Maintenance, seal, and resistance to shock increased and direct opening mechanism added. Three-conduit switches and 2NC switches are also available.
|
Original
|
|
PDF
|
D4B-1181N
Abstract: OMRON NEMA A600 D4B-1A11N 1116n D4B-1187N D4B-5117N IEC60947-5-1 INTRODUCTION ROLLER BEARING metal film fused resistor 47 welding machine wiring diagram
Text: Safety Limit Switch D4B-@N Snap-action contact with certified direct opening operation certification . Maintenance, seal, and resistance to shock increased and direct opening mechanism added. Three-conduit switches and 2NC switches are also available. Note: Contact your sales representative for details on models
|
Original
|
|
PDF
|
734587-1
Abstract: No abstract text available
Text: Instruction Sheet 408- 8330 Strain Relief 1375618- 1 For AMP- DUAC* 6- Position Connectors 28 JAN 10 Rev A 2. Align the connector with the connector opening of the strain relief as shown in Figure 2. Strain Relief End Connector Locking Latch Opening Connector Locking
|
Original
|
|
PDF
|
PK88136
Abstract: 88136-7-EN wheel potentiometer with switch EN60079-1 01ATEX2111X pk 88136 15PA148-CX 30-M1986
Text: Installation and Service Instructions for CX Weather-Sealed Explosion-proof Switches ISSUE 7 PK 88136 0518 WARNING IF USED IN APPLICATIONS CONCERNING HUMAN SAFETY • • • • • • Only use NC direct opening “positive opening”/”positive break” contacts, identified by the
|
Original
|
88136-7-EN
PK88136
wheel potentiometer with switch
EN60079-1
01ATEX2111X
pk 88136
15PA148-CX
30-M1986
|
PDF
|
Untitled
Abstract: No abstract text available
Text: 2 1/2" MENDA Made In America OPENING SPECIFICATIONS • 4 1/4" • • FRONT OPENING • • • • • Dual Card Badge Holder ◦ Material Thickness: .014" Center & .012" 3H badge holders ◦ Material Tolerance (thickness): +/- 10% ◦ Material Color: White Suede center, clear pockets
|
Original
|
|
PDF
|
ABS-08Pg13
Abstract: B4477 D4B-1111N D4B-2111N D4B-5111N D4B-0005N D4b-1187N omron 1a118
Text: Safety Limit Switch D4B-@N D4B-@N • Direct opening mechanism NC contacts only added to enable opening contacts when faults occur, such as fused contacts. • Wide standard operating temperature range: –40°C to 80°C (standard type). • Safety of lever settings ensured using a mechanism that
|
Original
|
|
PDF
|
Opening Procedure
Abstract: foot step generation of electricity waffle MIL-HDBK-263
Text: APPLICATION NOTE Waffle Pack Chip Carrier Handling/Opening Procedure Proper ESD handling practice should be adhered to at all times when handling Skyworks product. Step 1 Remove carrier clip. Do not allow separation between the waffle pack and cover. Step 2
|
Original
|
|
PDF
|
MIL-HDBK-263
Abstract: foot step generation of electricity
Text: REFERENCE MATERIAL APPLICATION NOTE Waffle Pack Chip Carrier Handling/Opening Procedure Proper ESD handling practice should be adhered to at all times when handling a Skyworks product. Step 1 Remove carrier clip. Do not allow separation between the waffle pack and cover.
|
Original
|
|
PDF
|
|
|
12800
Abstract: No abstract text available
Text: Overall Width OW Specifications: Opening Lip Length (L) Weld Seal Width (W) Shielding Bubble Bags Electrical Properties Surface Resistance: Outer Layer Inner Layer Static Decay Discharge Shielding Charge Generation Physical Properties Thickness:
|
Original
|
2011/65/EU
1907/2006/CE.
12800
|
PDF
|
HL-5500
Abstract: vctf 0.75 wire cable HL-5000
Text: General-purpose Limit Switch HL-5000 Economical, Miniature Limit Switch Boasting Rigid Construction Highly rigid construction head and cover snugly fit in box . Dustproof and drip-proof construction. Smooth operation with greater OT. Easy-to-wire conduit opening design.
|
Original
|
HL-5000
NL-2132
2356-81-300/Fax:
847-843-7900/Fax:
835-3011/Fax:
C004-E1-9
HL-5500
vctf 0.75 wire cable
HL-5000
|
PDF
|
gb14048.5
Abstract: 4116n D4B-4171N D4B-4A15N D4B-4117N D4B-4A16N SWITCHES GB14048 EN60947-5-1
Text: Safety Limit Switch D4B-@N CSM_D4B-_N_DS_E_6_1 Robust safety limit switch with metal housing Slow-action and snap-action contact with certified direct opening operation certification Note: Contact your sales representative for details on models with safety standard certification.
|
Original
|
|
PDF
|
HL-5000
Abstract: vctf 0.75 wire cable hl omron HL-5500 vctf 0.75
Text: General-purpose Limit Switch HL-5000 Economical, Miniature Limit Switch Boasting Rigid Construction Highly rigid construction head and cover snugly fit in box . Dustproof and drip-proof construction. Smooth operation with greater OT. Easy-to-wire conduit opening design.
|
Original
|
HL-5000
300sealing
C004-E1-9
HL-5000
vctf 0.75 wire cable
hl omron
HL-5500
vctf 0.75
|
PDF
|
BS4999
Abstract: mte overload mte thermal overload relay MTE Entrelec automatic brake failure indicator brake failure indicator CETA164 CETA324 DCPM022 DCPM045
Text: Technical Specification English } P3 P4 } DCPM heatsink temperature n.c. contact, opening when temperature is high P5 Thyristor fail detect (link to P3 to disable e.g. with old DCPM) P1 P2 Powerbrake DCBUA / DCPM D.C. Injection Brake System Issue 2 Thermistor connections
|
Original
|
|
PDF
|
D4B-0081N
Abstract: D4B-3570N D4B-3A71N D4B-0003N D4B-7171N D4B-7181N D4B-0010N E76675 EN60947-5-1 GS-ET-15
Text: R Heavy-Duty Safety Limit Switch D4B-jN Positive Action Limit Switches with Snap and Slow Action Contacts for Critical Switching Applications H All feature direct drive contacts to insure contact opening of double break contacts even with contact welding due
|
Original
|
EN60947-5-1
R9151643
GS-ET-15
UL508
E76675
BS5304,
1-800-55-OMRON
D4B-0081N
D4B-3570N
D4B-3A71N
D4B-0003N
D4B-7171N
D4B-7181N
D4B-0010N
E76675
EN60947-5-1
GS-ET-15
|
PDF
|
pin details of str W 6654
Abstract: details of str W 6654 FTM 7960 EX ic str 6654 85C80 str 6654 85C230 marking wr6 ula 1u
Text: MOV 9 1992 PRELIM INARY a Am85C230A Advanced Micro Devices Enhanced Serial Communication Controller with LocalTalk Support ESCC/LT DISTINCTIVE CHARACTERISTICS • - Generation of SYNC pulse before the SDLC opening FLAG - Generation of two SDLC opening FLAGs
|
OCR Scan
|
Am85C230A
Z85230
pin details of str W 6654
details of str W 6654
FTM 7960 EX
ic str 6654
85C80
str 6654
85C230
marking wr6
ula 1u
|
PDF
|
Untitled
Abstract: No abstract text available
Text: Chip Sentry Carrier Opening Procedure & Handling Procedure for Small Die Within Small Cell Cavities e.g., Discrete HFETs : cau tio n : ELECTROSTATIC SENSITIVE The die is an electrostatic sensitive device. Special handling m ethods and equipm ent m ust be used to prevent damage.
|
OCR Scan
|
|
PDF
|
Untitled
Abstract: No abstract text available
Text: ROYAL OHM Fusible Resistors Features • Ideal circuit opening controller, disconnecting units from overload rating specified • Flame retardant coating • Too low or to high ohmic value can be supplied on a case to case basis Explanation of Part Number and Ordering Procedure
|
OCR Scan
|
127mm
|
PDF
|
waffle
Abstract: No abstract text available
Text: CHIP SENTRY CARRIER OPENING PROCEDURE I C A U TIO N : ELECTROSTATIC SENSITIVE The die is an electrostatic sensitive device. Special handling methods and equipment must be used to prevent damage. 1. Ensure inspection area is ESD compliant. A clean room environment is desirable to minimize foreign material
|
OCR Scan
|
|
PDF
|
