A good PCB layout for the VN460SP-E involves keeping the high-current paths short and wide, using a solid ground plane, and placing the device close to the power source. A 4-layer PCB with a dedicated power plane and a solid ground plane is recommended.
The VN460SP-E has a thermal pad on the bottom of the package, which should be connected to a heat sink or a thermal interface material to ensure proper heat dissipation. A thermal interface material with a thermal conductivity of at least 1 W/mK is recommended.
The maximum allowed voltage on the input pins of the VN460SP-E is 40V, but it's recommended to keep the voltage below 36V to ensure reliable operation and to prevent damage to the device.
The VN460SP-E has built-in overcurrent and overvoltage protection, but it's still recommended to add external protection components such as fuses, TVS diodes, and voltage regulators to ensure the device is protected from external faults and surges.
The VN460SP-E is designed to operate at frequencies up to 100 kHz, but the recommended operating frequency range is 10 kHz to 50 kHz for optimal performance and efficiency.
Findchips
Findchips