-
The maximum current that can be sunk by each output of the ULN2064B is 500mA.
-
Yes, the ULN2064B can be used to drive inductive loads, but it's recommended to add a flyback diode to protect the device from back-EMF.
-
The minimum input voltage required for the ULN2064B to function properly is 4.5V, but it's recommended to use a minimum of 5V for reliable operation.
-
Yes, the ULN2064B can be used to drive relays, but the relay's coil voltage and current requirements must be within the device's specifications.
-
The maximum frequency at which the ULN2064B can switch is typically around 100kHz, but this can vary depending on the specific application and load.