The maximum power dissipation of the TSV731ICT is 670mW, which is calculated based on the maximum junction temperature (TJ) of 150°C and the thermal resistance (RthJA) of 125°C/W.
To ensure stability, it's recommended to use a gain resistor (RG) between 1kΩ to 10kΩ, and a feedback capacitor (CF) between 10pF to 100pF, depending on the specific application and frequency range.
To minimize noise and EMI, it's recommended to use a star-ground configuration, keep the input and output traces short and symmetrical, and use a ground plane to shield the device. Additionally, decoupling capacitors (e.g., 100nF) should be placed close to the device's power pins.
Yes, the TSV731ICT can be used in a single-supply configuration, but it's recommended to use a voltage divider to set the input common-mode voltage to half of the supply voltage. Additionally, the output voltage swing will be limited to about 1V from the supply rails.
The output capacitor value depends on the specific application and load requirements. A general rule of thumb is to use a capacitor value between 10nF to 100nF, with a minimum ESR (Equivalent Series Resistance) to ensure stability and minimize oscillations.
TSV731ICT datasheet
by STMicroelectronics
