TSU102IQ2T datasheet by STMicroelectronics

TSU102IQ2T Frequently Asked Questions (FAQs)

• What is the recommended operating voltage range for the TSU102IQ2T?
  The recommended operating voltage range for the TSU102IQ2T is 1.71 V to 1.89 V.
• How do I ensure signal integrity when using the TSU102IQ2T?
  To ensure signal integrity, use a low-impedance PCB design, minimize trace lengths, and use termination resistors as recommended in the datasheet.
• What is the maximum data transfer rate supported by the TSU102IQ2T?
  The TSU102IQ2T supports data transfer rates up to 10 Gbps.
• How do I handle power sequencing when using the TSU102IQ2T?
  Power sequencing is critical; ensure that the VCC supply is powered up before the VDD supply, and that the VCC supply is powered down after the VDD supply.
• What is the recommended PCB layout for the TSU102IQ2T?
  Use a 4-layer PCB with a solid ground plane, and keep the signal traces as short as possible. Avoid vias and layer changes under the device.