The recommended PCB layout for the TSOP38336 is to use a ground plane underneath the device, and to keep the input and output traces as short as possible to minimize noise and interference. A 4-layer PCB with a dedicated ground plane is recommended.
The AGC in the TSOP38336 is internally controlled and does not require any external components or adjustments. However, the AGC can be influenced by the input signal level, so it's recommended to ensure that the input signal is within the recommended range to achieve optimal performance.
The maximum operating temperature range for the TSOP38336 is -25°C to +85°C. However, it's recommended to operate the device within a temperature range of 0°C to +70°C for optimal performance and reliability.
The TSOP38336 has internal ESD protection, but it's still recommended to follow proper ESD handling procedures during assembly and testing. Additionally, using ESD protection devices such as TVS diodes or ESD protection arrays can provide additional protection for the device.
The recommended input signal format for the TSOP38336 is a modulated infrared signal with a carrier frequency of 38 kHz and a modulation frequency of up to 56 kHz. The input signal should be within the recommended amplitude range of 100 μV to 100 mV.
