Texas Instruments recommends a 4-layer PCB with a solid ground plane, and to keep the analog and digital signals separate to minimize noise and interference. Additionally, it's recommended to use a 10uF capacitor between VCC and GND, and to keep the input and output traces as short as possible.
To optimize performance, ensure that the input signals are within the recommended voltage range, and that the output load is within the recommended capacitance range. Additionally, use a low-ESR capacitor for the VCC pin, and ensure that the PCB layout is optimized for signal integrity.
The recommended power-up sequence is to apply VCC first, followed by the input signals. This ensures that the internal biasing circuitry is established before the input signals are applied.
The TSC2200IPW has built-in ESD protection, but it's still recommended to use external ESD protection devices, such as TVS diodes, to protect the device from external ESD events.
The recommended operating temperature range for the TSC2200IPW is -40°C to 85°C. Operating the device outside of this range may affect its performance and reliability.
TSC2200IPW datasheet
by Texas Instruments
