TSB43CB43APGF datasheet by Texas Instruments

TSB43CB43APGF Frequently Asked Questions (FAQs)

• What is the maximum cable length supported by the TSB43CB43APGF?
  The maximum cable length supported by the TSB43CB43APGF is approximately 4.5 meters (14.76 feet) for a single repeater configuration, and up to 9 meters (29.53 feet) for a dual repeater configuration, assuming a 1394b cable with a maximum attenuation of 12 dB.
• How do I configure the TSB43CB43APGF for a specific IEEE 1394 application?
  The TSB43CB43APGF can be configured using the TI-provided software development kit (SDK) or by writing custom code to control the device's registers. The SDK provides examples and documentation to help with configuration and customization.
• What is the power consumption of the TSB43CB43APGF?
  The TSB43CB43APGF has a typical power consumption of 1.2 W (400 mA at 3.0 V) in normal operation, and 0.5 W (167 mA at 3.0 V) in low-power mode. However, this can vary depending on the specific application and usage.
• Is the TSB43CB43APGF compatible with FireWire 800 (1394b) and FireWire 400 (1394a) devices?
  Yes, the TSB43CB43APGF is compatible with both FireWire 800 (1394b) and FireWire 400 (1394a) devices, as it supports both 1394b and 1394a protocols.
• Can the TSB43CB43APGF be used in a daisy-chain configuration?
  Yes, the TSB43CB43APGF can be used in a daisy-chain configuration, allowing multiple devices to be connected in series. However, the maximum number of devices and cable length may be limited by the specific application and IEEE 1394 specifications.