The recommended operating temperature range for the TS9347CP/1R00 is -40°C to 125°C, as specified in the datasheet. However, it's essential to note that the device's performance and reliability may degrade if operated outside this range.
To ensure proper powering, make sure to connect the VCC pin to a stable 3.3V or 5V power supply, and the GND pin to a solid ground. Additionally, decouple the power supply with a 10uF capacitor to reduce noise and ensure stable operation.
The TS9347CP/1R00 has a maximum data transfer rate of 100 Mbps, making it suitable for high-speed applications. However, the actual data transfer rate may vary depending on the system design, clock frequency, and other factors.
Yes, the TS9347CP/1R00 is compatible with 3.3V systems. The device's I/O pins are 3.3V-tolerant, and it can operate with a 3.3V power supply. However, ensure that the input signals are within the recommended voltage range to avoid damage or malfunction.
To handle ESD protection, ensure that the device is handled and stored in an ESD-protected environment. Use ESD-protective packaging, wrist straps, and mats to prevent static electricity damage. Additionally, consider adding external ESD protection devices, such as TVS diodes, to the circuit design.
TS9347CP/1R00 datasheet
by STMicroelectronics
