The recommended operating voltage range for the TS924AIDT is 2.7V to 5.5V.
To ensure proper power-up and initialization, apply a stable voltage supply, connect the VCC pin to the power supply, and ensure the reset pin (RST) is tied to VCC through a pull-up resistor.
The TS924AIDT supports a maximum data transfer rate of 400 kbps.
To configure the TS924AIDT for I2C or SMBus operation, connect the SCL pin to the clock signal, the SDA pin to the data signal, and set the address pins (A0, A1, A2) to select the desired slave address.
The INT pin is an interrupt output that signals the host processor when the TS924AIDT has completed a conversion or has an error condition.