TS922AIPT datasheet by STMicroelectronics

TS922AIPT Frequently Asked Questions (FAQs)

• What is the recommended operating temperature range for the TS922AIPT?
  The recommended operating temperature range for the TS922AIPT is -40°C to 125°C.
• How do I ensure the TS922AIPT is properly powered?
  The TS922AIPT requires a single 3.3V power supply, and it's recommended to use a decoupling capacitor of 10nF to 100nF between VCC and GND to ensure stable operation.
• What is the maximum data transfer rate of the TS922AIPT?
  The TS922AIPT has a maximum data transfer rate of 100 Mbps.
• How do I configure the TS922AIPT for I2C or SPI mode?
  The TS922AIPT can be configured for I2C or SPI mode by setting the MODE pin high or low, respectively. For I2C mode, the MODE pin should be connected to VCC, and for SPI mode, it should be connected to GND.
• What is the purpose of the RST pin on the TS922AIPT?
  The RST pin is an active-low reset input that can be used to reset the TS922AIPT to its default state. It should be pulled up to VCC through a resistor.