TS922AIDT datasheet by STMicroelectronics

TS922AIDT Frequently Asked Questions (FAQs)

• What is the recommended operating temperature range for the TS922AIDT?
  The recommended operating temperature range for the TS922AIDT is -40°C to 125°C.
• How do I configure the TS922AIDT for I2C or SPI interface?
  The TS922AIDT can be configured for I2C or SPI interface by setting the MODE pin high or low, respectively. For I2C, connect the MODE pin to VCC, and for SPI, connect it to GND.
• What is the maximum clock frequency supported by the TS922AIDT?
  The TS922AIDT supports clock frequencies up to 10 MHz for I2C and 20 MHz for SPI.
• How do I handle the interrupt output of the TS922AIDT?
  The interrupt output of the TS922AIDT is an open-drain output, so it requires an external pull-up resistor to VCC. The interrupt is active-low, meaning it goes low when an interrupt event occurs.
• What is the power consumption of the TS922AIDT in standby mode?
  The power consumption of the TS922AIDT in standby mode is typically around 1 μA.