TS922AID datasheet by STMicroelectronics

TS922AID Frequently Asked Questions (FAQs)

• What is the recommended operating temperature range for the TS922AID?
  The recommended operating temperature range for the TS922AID is -40°C to 125°C.
• How do I configure the TS922AID for I2C or SPI interface?
  The TS922AID can be configured for I2C or SPI interface by setting the MODE pin high or low, respectively, during power-up. For I2C, connect MODE to VCC, and for SPI, connect MODE to GND.
• What is the maximum clock frequency supported by the TS922AID?
  The TS922AID supports clock frequencies up to 10 MHz for I2C and 20 MHz for SPI.
• How do I handle the interrupt output (INT) of the TS922AID?
  The INT output is an open-drain output, so it requires an external pull-up resistor to VCC. The INT output is active-low, meaning it goes low when an interrupt occurs.
• What is the purpose of the RST pin on the TS922AID?
  The RST pin is an active-low reset input that resets the device when pulled low. It can be connected to a reset generator or a manual reset button.