TS914AIDT datasheet by STMicroelectronics

TS914AIDT Frequently Asked Questions (FAQs)

• What is the recommended operating temperature range for the TS914AIDT?
  The recommended operating temperature range for the TS914AIDT is -40°C to 125°C.
• How do I configure the TS914AIDT for I2C or SPI interface?
  The TS914AIDT can be configured for I2C or SPI interface by setting the MODE pin high or low, respectively. For I2C, connect MODE to VCC, and for SPI, connect MODE to GND.
• What is the maximum data transfer rate of the TS914AIDT?
  The maximum data transfer rate of the TS914AIDT is 10 Mbps for I2C and 20 Mbps for SPI.
• How do I handle the interrupt output of the TS914AIDT?
  The interrupt output of the TS914AIDT is an open-drain output, so it requires an external pull-up resistor to VCC. The interrupt is active-low, meaning it is asserted low when an interrupt event occurs.
• What is the power consumption of the TS914AIDT in standby mode?
  The power consumption of the TS914AIDT in standby mode is typically 10 μA.