TS912AIDT datasheet by STMicroelectronics

TS912AIDT Frequently Asked Questions (FAQs)

• What is the recommended operating voltage range for the TS912AIDT?
  The recommended operating voltage range for the TS912AIDT is 2.7V to 5.5V.
• How do I ensure the TS912AIDT is properly powered up and initialized?
  To ensure proper power-up and initialization, apply a stable voltage supply, connect the VCC pin to the power supply, and ensure the reset pin (RST) is tied to VCC through a pull-up resistor.
• What is the maximum data transfer rate supported by the TS912AIDT?
  The TS912AIDT supports a maximum data transfer rate of 400 kbps.
• How do I configure the TS912AIDT for I2C or SPI mode?
  To configure the TS912AIDT for I2C mode, connect the SCL pin to the I2C clock signal and the SDA pin to the I2C data signal. For SPI mode, connect the SCK pin to the SPI clock signal, the MOSI pin to the SPI master output, and the MISO pin to the SPI slave output.
• What is the purpose of the INT pin on the TS912AIDT?
  The INT pin is an interrupt output that signals the host processor when data is available in the receive FIFO or when a transmission is complete.