Texas Instruments provides a recommended PCB layout in the datasheet, but it's also recommended to follow general high-speed PCB design guidelines, such as using a solid ground plane, minimizing trace lengths, and using 50-ohm transmission lines for the differential pairs.
To ensure signal integrity, use a differential signal layout, keep the signal traces short and away from noise sources, use termination resistors, and consider using a common-mode filter or choke to reduce electromagnetic interference (EMI).
The maximum cable length supported by the TS5A4624 depends on the specific application and the signal frequency. As a general rule, the maximum cable length is limited by the signal attenuation and distortion. For example, at 1 Gbps, the maximum cable length is typically around 10-15 meters.
To troubleshoot issues with the TS5A4624, use a logic analyzer or oscilloscope to verify the signal integrity, check the power supply and ground connections, and ensure that the device is properly configured and terminated. Also, consult the datasheet and application notes for specific troubleshooting guidelines.
The TS5A4624 is a 3.3-V device, but it can be used with other logic families, such as 1.8-V or 2.5-V devices, by using level translators or voltage dividers to match the voltage levels.
TS5A4624DCKTG4 datasheet
by Texas Instruments
Findchips
