TS393IDT datasheet by STMicroelectronics

TS393IDT Frequently Asked Questions (FAQs)

• What is the recommended operating temperature range for the TS393IDT?
  The recommended operating temperature range for the TS393IDT is -40°C to 125°C.
• How do I ensure the TS393IDT is properly powered?
  The TS393IDT requires a single 3.3V power supply, and it's recommended to use a decoupling capacitor of 10nF to 100nF between VCC and GND to ensure stable operation.
• What is the maximum data transfer rate of the TS393IDT?
  The TS393IDT has a maximum data transfer rate of 100 Mbps.
• How do I configure the TS393IDT for I2C or SPI mode?
  The TS393IDT can be configured for I2C or SPI mode by setting the MODE pin high or low, respectively. For I2C mode, the MODE pin should be connected to VCC, and for SPI mode, it should be connected to GND.
• What is the purpose of the RST pin on the TS393IDT?
  The RST pin is an active-low reset input that can be used to reset the TS393IDT to its default state. It should be pulled up to VCC through a resistor.