The maximum cable length supported by the TRS232ECDWR is approximately 50 feet (15.24 meters) at a data rate of 115.2 kbps. However, this can vary depending on the cable quality, noise environment, and other factors.
Yes, the TRS232ECDWR is designed to operate in harsh environments with temperatures ranging from -40°C to 85°C. It also has a high level of electrostatic discharge (ESD) protection and can withstand voltage transients and surges.
The TRS232ECDWR has built-in error detection and correction mechanisms, including parity checking, stop-bit checking, and overrun detection. It also has a receiver timeout feature to detect and recover from data transmission errors.
Yes, the TRS232ECDWR is compatible with other RS-232 transceivers that comply with the EIA/TIA-232 standard. However, it's recommended to check the specific requirements of the target application and ensure that the transceivers are configured correctly for proper operation.
The power consumption of the TRS232ECDWR depends on the operating mode and the supply voltage. In the active mode, the typical power consumption is around 5 mA at 3.3 V or 10 mA at 5 V. In the shutdown mode, the power consumption is typically less than 1 μA.
TRS232ECDWR datasheet
by Texas Instruments
