TPS79730DCKT datasheet by Texas Instruments

TPS79730DCKT Frequently Asked Questions (FAQs)

• What is the maximum input voltage that the TPS79730DCKT can handle?
  The TPS79730DCKT can handle input voltages up to 12V, but it's recommended to operate within the 5.5V to 10V range for optimal performance.
• How do I ensure the stability of the output voltage?
  To ensure stability, it's essential to use a minimum output capacitance of 10uF, and a maximum ESR of 1 ohm. Additionally, the output capacitor should be placed as close to the output pin as possible.
• What is the maximum output current that the TPS79730DCKT can provide?
  The TPS79730DCKT can provide up to 150mA of output current, but it's recommended to operate within the 100mA range for optimal performance and to prevent overheating.
• How do I adjust the output voltage?
  The output voltage can be adjusted by using a resistor divider network between the VOUT pin and the GND pin. The output voltage can be calculated using the formula: VOUT = 1.2V x (R1 + R2) / R2.
• What is the purpose of the EN pin?
  The EN (Enable) pin is used to enable or disable the regulator. When the EN pin is pulled high, the regulator is enabled, and when it's pulled low, the regulator is disabled.