The maximum input voltage that can be applied to the TPS79225DBVR is 13.2V, as specified in the datasheet. Exceeding this voltage may damage the device.
To ensure the stability of the output voltage, it is recommended to use a minimum output capacitance of 10uF and a maximum ESR of 1 ohm, as specified in the datasheet. Additionally, the input capacitor should be at least 1uF with an ESR of 1 ohm or less.
The maximum output current that the TPS79225DBVR can deliver is 2A, as specified in the datasheet. Exceeding this current may cause the device to overheat or malfunction.
The output voltage of the TPS79225DBVR can be calculated using the formula: Vout = (R1 / R2) x 1.25V, where R1 and R2 are the resistors connected to the FB pin. The output voltage range is from 1.25V to 5.5V.
The quiescent current of the TPS79225DBVR is typically 50uA, as specified in the datasheet. This is the current consumed by the device when it is not switching.
TPS79225DBVR datasheet
by Texas Instruments
Findchips
