The maximum input voltage that can be applied to the TPS79133DBVREP is 18V, but it's recommended to operate within the recommended input voltage range of 7V to 15V for optimal performance.
To ensure the stability of the output voltage, it's essential to use the recommended output capacitor value and type, and to follow the layout guidelines provided in the datasheet. Additionally, the input capacitor should be placed close to the VIN pin to minimize noise and ensure stability.
The maximum output current that the TPS79133DBVREP can deliver is 3A, but it's recommended to operate within the recommended output current range of 1A to 2A for optimal performance and to prevent overheating.
The output voltage of the TPS79133DBVREP can be adjusted by using a resistor divider network between the VOUT pin and the GND pin. The output voltage can be calculated using the formula provided in the datasheet.
The EN (Enable) pin is used to enable or disable the regulator. When the EN pin is pulled high, the regulator is enabled, and when it's pulled low, the regulator is disabled. This pin can be used to implement power sequencing or to turn off the regulator when not in use.
TPS79133DBVREP datasheet
by Texas Instruments
Findchips
