TPS78633KTTRG3 datasheet by Texas Instruments

TPS78633KTTRG3 Frequently Asked Questions (FAQs)

• What is the maximum input voltage that can be applied to the TPS78633KTTRG3?
  The maximum input voltage is 15V, but it's recommended to keep it below 13.2V to ensure reliable operation and prevent damage to the device.
• How do I ensure the output voltage is stable and accurate?
  To ensure stable and accurate output voltage, make sure to use a high-quality output capacitor with low ESR (Equivalent Series Resistance) and a sufficient capacitance value (e.g., 10uF). Also, keep the input voltage stable and within the recommended range.
• What is the minimum input voltage required for the TPS78633KTTRG3 to operate?
  The minimum input voltage required for the TPS78633KTTRG3 to operate is 2.7V. However, the device can operate down to 2.5V with reduced performance and accuracy.
• Can I use the TPS78633KTTRG3 in a high-temperature environment?
  The TPS78633KTTRG3 is rated for operation up to 125°C (TJ). However, it's essential to consider the device's power dissipation and thermal management to ensure reliable operation in high-temperature environments.
• How do I calculate the output voltage of the TPS78633KTTRG3?
  The output voltage of the TPS78633KTTRG3 can be calculated using the formula: VOUT = 1.221V x (1 + R1/R2), where R1 and R2 are the resistors used in the feedback network.