TPS77633D datasheet by Texas Instruments

TPS77633D Frequently Asked Questions (FAQs)

• What is the maximum input voltage that the TPS77633D can handle?
  The TPS77633D can handle input voltages up to 17V, but it's recommended to keep it below 15V for optimal performance and reliability.
• How do I choose the right output capacitor for the TPS77633D?
  The output capacitor should be chosen based on the output voltage and current requirements. A general rule of thumb is to use a capacitor with a value of at least 10uF and a voltage rating of at least 1.5 times the output voltage.
• What is the purpose of the EN pin on the TPS77633D?
  The EN (enable) pin is used to turn the regulator on and off. When the EN pin is high, the regulator is enabled, and when it's low, the regulator is disabled.
• How do I adjust the output voltage of the TPS77633D?
  The output voltage of the TPS77633D can be adjusted by using a resistor divider network between the output and the ADJ pin. The output voltage is determined by the ratio of the resistors and the internal reference voltage.
• What is the thermal shutdown temperature of the TPS77633D?
  The thermal shutdown temperature of the TPS77633D is typically around 150°C to 170°C, but this can vary depending on the specific device and application.