The maximum input voltage that can be applied to the TPS76325DBVR is 13.2V, as specified in the datasheet. Exceeding this voltage may damage the device.
To ensure stability of the output voltage, it is recommended to use a minimum output capacitance of 2.2uF, as specified in the datasheet. Additionally, the output capacitor should have a low equivalent series resistance (ESR) to minimize voltage ripple.
The maximum output current that the TPS76325DBVR can deliver is 150mA, as specified in the datasheet. Exceeding this current may cause the device to overheat or malfunction.
The output voltage of the TPS76325DBVR can be calculated using the formula: Vout = Vref x (1 + R1/R2), where Vref is the internal reference voltage (1.25V), and R1 and R2 are the resistors used in the output voltage divider network.
The EN (enable) pin on the TPS76325DBVR is used to enable or disable the device. When the EN pin is pulled high, the device is enabled and the output voltage is regulated. When the EN pin is pulled low, the device is disabled and the output voltage is turned off.
TPS76325DBVR datasheet
by Texas Instruments
