The maximum input voltage that can be applied to the TPS75833KTTT is 6.5V, as specified in the datasheet. Exceeding this voltage may damage the device.
To ensure the stability of the output voltage, it is recommended to use a minimum output capacitance of 10uF and a maximum ESR of 1 ohm, as specified in the datasheet. Additionally, the input capacitor should be placed as close to the VIN pin as possible.
The minimum input voltage required for the TPS75833KTTT to operate is 2.7V, as specified in the datasheet. Operating the device below this voltage may affect its performance and stability.
The TPS75833KTTT is rated for operation up to 125°C, but the device's performance and reliability may be affected at high temperatures. It is recommended to derate the output current and voltage according to the thermal derating curve provided in the datasheet.
The output voltage of the TPS75833KTTT can be calculated using the formula: VOUT = (R1 / R2) x 1.25V, where R1 and R2 are the resistors connected to the FB pin. The output voltage range is from 1.25V to 5.5V.
TPS75833KTTT datasheet
by Texas Instruments
Findchips
