TPS75825KTTR datasheet by Texas Instruments

TPS75825KTTR Frequently Asked Questions (FAQs)

• What is the maximum input voltage that can be applied to the TPS75825KTTR?
  The maximum input voltage that can be applied to the TPS75825KTTR is 6.5V, as specified in the datasheet. Exceeding this voltage may damage the device.
• How do I ensure the stability of the output voltage?
  To ensure the stability of the output voltage, it is recommended to use a minimum output capacitance of 10uF and a maximum equivalent series resistance (ESR) of 1 ohm, as specified in the datasheet.
• What is the maximum output current that the TPS75825KTTR can provide?
  The maximum output current that the TPS75825KTTR can provide is 1A, as specified in the datasheet. Exceeding this current may cause the device to overheat or malfunction.
• How do I calculate the output voltage of the TPS75825KTTR?
  The output voltage of the TPS75825KTTR can be calculated using the formula: Vout = (R1 / R2) x Vref, where R1 and R2 are the resistors connected to the FB pin, and Vref is the internal reference voltage (1.25V).
• What is the purpose of the EN pin on the TPS75825KTTR?
  The EN (enable) pin on the TPS75825KTTR is used to enable or disable the device. When the EN pin is pulled high, the device is enabled, and when it is pulled low, the device is disabled.