TPS75801KTTR datasheet by Texas Instruments

TPS75801KTTR Frequently Asked Questions (FAQs)

• What is the maximum input voltage that can be applied to the TPS75801KTTR?
  The maximum input voltage that can be applied to the TPS75801KTTR is 6.5V, as specified in the datasheet. Exceeding this voltage may damage the device.
• How do I ensure the stability of the output voltage in the TPS75801KTTR?
  To ensure the stability of the output voltage, it is recommended to use a minimum output capacitance of 10uF and a maximum equivalent series resistance (ESR) of 1 ohm, as specified in the datasheet.
• What is the maximum output current that the TPS75801KTTR can deliver?
  The maximum output current that the TPS75801KTTR can deliver is 1A, as specified in the datasheet. Exceeding this current may cause the device to overheat or malfunction.
• How do I handle thermal considerations for the TPS75801KTTR?
  To handle thermal considerations, ensure that the device is mounted on a PCB with a sufficient thermal pad, and that the ambient temperature is within the specified operating range of -40°C to 125°C. Additionally, ensure that the device is not exposed to excessive heat sources or thermal stress.
• What is the purpose of the EN pin on the TPS75801KTTR?
  The EN (enable) pin is used to enable or disable the output voltage of the TPS75801KTTR. When the EN pin is high, the output voltage is enabled, and when it is low, the output voltage is disabled.