TPS75618KTTT datasheet by Texas Instruments

TPS75618KTTT Frequently Asked Questions (FAQs)

• What is the maximum input voltage that can be applied to the TPS75618KTTT?
  The maximum input voltage that can be applied to the TPS75618KTTT is 15V, but it's recommended to keep it below 13.2V to ensure reliable operation.
• How do I ensure the TPS75618KTTT is stable and doesn't oscillate?
  To ensure stability, make sure to use a minimum output capacitance of 10uF, and a maximum ESR of 1 ohm. Also, keep the input and output capacitors close to the device and use a low-ESR capacitor for the output.
• What is the minimum input voltage required for the TPS75618KTTT to operate?
  The minimum input voltage required for the TPS75618KTTT to operate is 7.5V, but it's recommended to keep it above 8V for reliable operation.
• Can I use the TPS75618KTTT in a high-temperature environment?
  The TPS75618KTTT is rated for operation up to 125°C, but the maximum junction temperature should not exceed 150°C. Make sure to follow the thermal design guidelines and use a suitable heat sink if necessary.
• How do I calculate the output voltage of the TPS75618KTTT?
  The output voltage of the TPS75618KTTT can be calculated using the formula: Vout = 1.5V x (1 + R1/R2), where R1 and R2 are the resistors used in the feedback network.