TPS75601KTTR datasheet by Texas Instruments

TPS75601KTTR Frequently Asked Questions (FAQs)

• What is the maximum input voltage that can be applied to the TPS75601KTTR?
  The maximum input voltage that can be applied to the TPS75601KTTR is 15V, but it's recommended to keep it below 13.2V for reliable operation.
• How do I ensure the stability of the output voltage?
  To ensure the stability of the output voltage, it's essential to use a minimum output capacitance of 10uF, and a maximum ESR of 1 ohm. Additionally, the output capacitor should be placed as close to the output pin as possible.
• What is the maximum output current that the TPS75601KTTR can deliver?
  The maximum output current that the TPS75601KTTR can deliver is 1A, but it's recommended to keep it below 0.8A for reliable operation and to prevent overheating.
• How do I protect the TPS75601KTTR from overheating?
  To protect the TPS75601KTTR from overheating, ensure good airflow around the device, use a heat sink if necessary, and keep the junction temperature below 125°C. Also, avoid operating the device at maximum output current and input voltage simultaneously.
• What is the purpose of the EN pin, and how do I use it?
  The EN (enable) pin is used to turn the device on or off. To use it, connect the EN pin to a logic-level input signal (0V to 1.5V). When the EN pin is high (above 1.5V), the device is enabled, and when it's low (below 0.5V), the device is disabled.