TPS73701DCQG4 datasheet by Texas Instruments

TPS73701DCQG4 Frequently Asked Questions (FAQs)

• What is the maximum input voltage that can be applied to the TPS73701DCQG4?
  The maximum input voltage that can be applied to the TPS73701DCQG4 is 5.5V, as specified in the datasheet. Exceeding this voltage may damage the device.
• How do I ensure stability of the output voltage in my design?
  To ensure stability of the output voltage, it is recommended to use a minimum output capacitance of 10uF, and to follow the layout guidelines provided in the datasheet to minimize noise and parasitic inductance.
• What is the maximum output current that the TPS73701DCQG4 can deliver?
  The maximum output current that the TPS73701DCQG4 can deliver is 1A, as specified in the datasheet. Exceeding this current may cause the device to overheat or malfunction.
• How do I adjust the output voltage of the TPS73701DCQG4?
  The output voltage of the TPS73701DCQG4 can be adjusted by using an external resistor divider network between the VOUT pin and the GND pin. The datasheet provides a formula to calculate the required resistor values for a specific output voltage.
• What is the purpose of the EN pin on the TPS73701DCQG4?
  The EN (Enable) pin on the TPS73701DCQG4 is used to enable or disable the output voltage. When the EN pin is pulled high, the output voltage is enabled, and when it is pulled low, the output voltage is disabled.