TPS73630DBVRG4 datasheet by Texas Instruments

TPS73630DBVRG4 Frequently Asked Questions (FAQs)

• What is the maximum input voltage that can be applied to the TPS73630DBVRG4?
  The maximum input voltage that can be applied to the TPS73630DBVRG4 is 6V. Exceeding this voltage can cause damage to the device.
• How do I ensure stability of the output voltage in the TPS73630DBVRG4?
  To ensure stability of the output voltage, a minimum output capacitance of 2.2uF is recommended. Additionally, the output capacitor should have a low equivalent series resistance (ESR) to minimize voltage ripple.
• What is the maximum output current that the TPS73630DBVRG4 can deliver?
  The maximum output current that the TPS73630DBVRG4 can deliver is 1A. However, the output current should be derated based on the ambient temperature and the input voltage to ensure reliable operation.
• How do I configure the enable pin (EN) of the TPS73630DBVRG4?
  The enable pin (EN) is an active-high input that enables or disables the regulator. To enable the regulator, the EN pin should be connected to a logic high signal (typically VCC). To disable the regulator, the EN pin should be connected to a logic low signal (typically GND).
• What is the thermal shutdown temperature of the TPS73630DBVRG4?
  The thermal shutdown temperature of the TPS73630DBVRG4 is typically 150°C. When the junction temperature exceeds this value, the regulator will shut down to prevent damage.