TPS73130DBVR datasheet by Texas Instruments

TPS73130DBVR Frequently Asked Questions (FAQs)

• What is the maximum input voltage that can be applied to the TPS73130DBVR?
  The maximum input voltage that can be applied to the TPS73130DBVR is 13.2V, as specified in the datasheet. Exceeding this voltage may damage the device.
• How do I ensure stability of the output voltage in my design?
  To ensure stability of the output voltage, it is recommended to use a minimum output capacitance of 10uF, and to follow the layout guidelines provided in the datasheet to minimize noise and oscillations.
• What is the maximum output current that the TPS73130DBVR can deliver?
  The maximum output current that the TPS73130DBVR can deliver is 1.5A, as specified in the datasheet. Exceeding this current may cause the device to overheat or malfunction.
• How do I adjust the output voltage of the TPS73130DBVR?
  The output voltage of the TPS73130DBVR can be adjusted by using an external resistor divider network between the VOUT and ADJ pins. The datasheet provides a formula to calculate the required resistor values for a desired output voltage.
• What is the purpose of the EN pin on the TPS73130DBVR?
  The EN (Enable) pin is used to enable or disable the output voltage of the TPS73130DBVR. When the EN pin is pulled low, the output voltage is disabled, and when it is pulled high, the output voltage is enabled.