Please enter a valid full or partial manufacturer part number with a minimum of 3 letters or numbers

    Part Img TPS72501DCQRG4 datasheet by Texas Instruments

    • Low Input Voltage, Any Cap, 1-A Low-Dropout Linear Regulator with Supervisor
    • Original
    • Yes
    • Yes
    • Active
    • EAR99
    • 8542.39.00.01
    • 8542.39.00.00
    • Powered by Findchips Logo Findchips
    • Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.

    TPS72501DCQRG4 datasheet preview

    TPS72501DCQRG4 Frequently Asked Questions (FAQs)

    • The maximum input voltage that can be applied to the TPS72501DCQRG4 is 5.5V, as specified in the absolute maximum ratings section of the datasheet. Exceeding this voltage can damage the device.
    • To ensure stability of the output voltage, it is recommended to use a minimum output capacitance of 2.2uF and a maximum ESR of 1 ohm, as specified in the datasheet. Additionally, the input capacitance should be at least 1uF to ensure stability.
    • The maximum output current that the TPS72501DCQRG4 can deliver is 150mA, as specified in the electrical characteristics section of the datasheet. Exceeding this current can cause the device to overheat or malfunction.
    • The output voltage of the TPS72501DCQRG4 can be calculated using the formula: Vout = 1.5V + (R1/R2) * (Vadj - 1.5V), where R1 and R2 are the resistors connected to the ADJ pin, and Vadj is the voltage applied to the ADJ pin.
    • The quiescent current of the TPS72501DCQRG4 is typically 50uA, as specified in the electrical characteristics section of the datasheet. This is the current consumed by the device when it is not providing any output current.
    Supplyframe Tracking Pixel