The maximum input voltage that can be applied to the TPS72325DBVR is 6.5V, as specified in the datasheet. Exceeding this voltage may damage the device.
To ensure stability of the output voltage, it is recommended to use a minimum output capacitance of 10uF with an ESR of 1ohm or less, as specified in the datasheet. Additionally, the input capacitor should be at least 1uF with an ESR of 1ohm or less.
The maximum output current that the TPS72325DBVR can deliver is 150mA, as specified in the datasheet. Exceeding this current may cause the device to overheat or malfunction.
The output voltage of the TPS72325DBVR can be calculated using the formula: Vout = (R1 / R2) x 1.25V, where R1 and R2 are the resistors connected to the FB pin. The output voltage range is from 1.25V to 5.5V.
The quiescent current of the TPS72325DBVR is typically 50uA, as specified in the datasheet. This is the current consumed by the device when it is not providing any output current.
TPS72325DBVR datasheet
by Texas Instruments
Findchips
