TPS72301DBVTG4 datasheet by Texas Instruments

TPS72301DBVTG4 Frequently Asked Questions (FAQs)

• What is the maximum input voltage that can be applied to the TPS72301DBVTG4?
  The maximum input voltage that can be applied to the TPS72301DBVTG4 is 6.5V, as specified in the datasheet. Exceeding this voltage may damage the device.
• How do I ensure stability of the output voltage in my design?
  To ensure stability of the output voltage, it is recommended to use a minimum output capacitance of 10uF, and to follow the layout guidelines provided in the datasheet to minimize noise and parasitic inductance.
• What is the maximum output current that the TPS72301DBVTG4 can deliver?
  The maximum output current that the TPS72301DBVTG4 can deliver is 150mA, as specified in the datasheet. Exceeding this current may cause the device to overheat or malfunction.
• How do I calculate the output voltage of the TPS72301DBVTG4?
  The output voltage of the TPS72301DBVTG4 can be calculated using the formula: Vout = (R1 / R2) * (Vin - Vref), where R1 and R2 are the resistors used in the feedback network, Vin is the input voltage, and Vref is the internal reference voltage (1.2V).
• What is the purpose of the EN pin on the TPS72301DBVTG4?
  The EN (enable) pin on the TPS72301DBVTG4 is used to enable or disable the output voltage. When the EN pin is pulled low, the output voltage is disabled, and when it is pulled high, the output voltage is enabled.