The maximum input voltage that can be applied to the TPS71718DCKT is 5.5V, as specified in the datasheet. Exceeding this voltage may damage the device.
To ensure stability of the output voltage, it is recommended to use a minimum output capacitance of 10uF and a maximum ESR of 1 ohm, as specified in the datasheet. Additionally, the input capacitor should be at least 1uF.
The maximum output current that the TPS71718DCKT can provide is 1.8A, as specified in the datasheet. Exceeding this current may cause the device to overheat or malfunction.
The output voltage of the TPS71718DCKT can be adjusted by using a resistive divider network between the output and the ADJ pin. The output voltage can be calculated using the formula: Vout = 1.25V x (1 + R1/R2), where R1 and R2 are the resistors in the divider network.
The thermal shutdown temperature of the TPS71718DCKT is 150°C, as specified in the datasheet. If the device temperature exceeds this value, it will shut down to prevent damage.
TPS71718DCKT datasheet
by Texas Instruments
