TPS70618DBVR datasheet by Texas Instruments

TPS70618DBVR Frequently Asked Questions (FAQs)

• What is the maximum input voltage that can be applied to the TPS70618DBVR?
  The maximum input voltage that can be applied to the TPS70618DBVR is 18V. Exceeding this voltage may damage the device.
• How do I ensure stability of the output voltage in the TPS70618DBVR?
  To ensure stability of the output voltage, it is recommended to use a minimum output capacitance of 10uF and a maximum ESR of 1 ohm. Additionally, the output capacitor should be placed as close to the output pin as possible.
• What is the maximum output current that the TPS70618DBVR can provide?
  The maximum output current that the TPS70618DBVR can provide is 150mA. Exceeding this current may cause the device to overheat or malfunction.
• How do I adjust the output voltage of the TPS70618DBVR?
  The output voltage of the TPS70618DBVR can be adjusted by using a resistor divider network between the output pin and the adjust pin. The output voltage can be calculated using the formula: Vout = 1.25V x (1 + R1/R2).
• What is the purpose of the enable pin on the TPS70618DBVR?
  The enable pin on the TPS70618DBVR is used to turn the device on or off. When the enable pin is pulled low, the device is in shutdown mode and consumes very low current. When the enable pin is pulled high, the device is enabled and operates normally.