Texas Instruments provides a recommended PCB layout in the datasheet, but it's also important to follow general high-frequency layout guidelines, such as keeping the input and output capacitors close to the IC, using a solid ground plane, and minimizing trace lengths and widths.
The output capacitor selection depends on the output voltage, output current, and desired ripple voltage. A general rule of thumb is to choose a capacitor with a capacitance value of at least 10uF and a voltage rating of at least 1.5 times the output voltage. Additionally, consider the capacitor's ESR (Equivalent Series Resistance) and ESL (Equivalent Series Inductance) to ensure it can handle the high-frequency switching of the converter.
The TPS62612YFDR has an absolute maximum input voltage rating of 6V, but the recommended maximum input voltage is 5.5V to ensure reliable operation and to prevent damage to the IC.
The TPS62612YFDR has a built-in overcurrent protection feature that limits the output current to a maximum of 3.5A. However, to implement additional overcurrent protection, you can add an external current sense resistor and a comparator to detect overcurrent conditions and shut down the converter if necessary.
The TPS62612YFDR has a thermal derating curve that reduces the maximum output current as the junction temperature increases. The derating curve is provided in the datasheet, and it's essential to consider it when designing the converter to ensure reliable operation and prevent overheating.
TPS62612YFDR datasheet
by Texas Instruments
Findchips
