The maximum input voltage that can be applied to the TPS62237DRYR is 17V, but it's recommended to keep it below 15V for optimal performance and reliability.
To ensure the stability of the output voltage, make sure to use a minimum output capacitance of 10uF, and a maximum ESR of 1 ohm. Also, ensure that the input capacitance is at least 10uF and the input voltage is within the recommended range.
The maximum output current that the TPS62237DRYR can deliver is 2A, but it's recommended to keep it below 1.5A for optimal performance and reliability.
The output voltage can be configured by connecting the FB pin to a resistive divider network. The output voltage is determined by the ratio of the resistors in the divider network.
The EN (enable) pin is used to enable or disable the regulator. When the EN pin is high, the regulator is enabled, and when it's low, the regulator is disabled.
TPS62237DRYR datasheet
by Texas Instruments
