TPS62130ARGTT datasheet by Texas Instruments

TPS62130ARGTT Frequently Asked Questions (FAQs)

• What is the maximum input voltage that can be applied to the TPS62130ARGTT?
  The maximum input voltage that can be applied to the TPS62130ARGTT is 18V, but it's recommended to keep it below 15V for optimal performance and reliability.
• How do I ensure the stability of the output voltage?
  To ensure the stability of the output voltage, make sure to use a suitable output capacitor with a low ESR (Equivalent Series Resistance) and a sufficient capacitance value, as recommended in the datasheet.
• What is the minimum input capacitance required for the TPS62130ARGTT?
  The minimum input capacitance required for the TPS62130ARGTT is 10uF, but it's recommended to use a higher value (e.g., 22uF) for better performance and stability.
• Can I use the TPS62130ARGTT in a high-temperature environment?
  The TPS62130ARGTT is rated for operation up to 125°C, but its performance and reliability may degrade at high temperatures. It's recommended to use a heat sink or thermal management techniques to keep the device temperature below 100°C.
• How do I calculate the output voltage of the TPS62130ARGTT?
  The output voltage of the TPS62130ARGTT can be calculated using the formula: Vout = Vref x (1 + R1/R2), where Vref is the internal reference voltage (1.21V), and R1 and R2 are the resistors in the feedback network.