TPS61202DRCR datasheet by Texas Instruments

TPS61202DRCR Frequently Asked Questions (FAQs)

• What is the maximum input voltage that can be applied to the TPS61202DRCR?
  The maximum input voltage that can be applied to the TPS61202DRCR is 15V, but it's recommended to keep it below 12V for optimal performance and reliability.
• How do I ensure the stability of the output voltage?
  To ensure the stability of the output voltage, make sure to use a suitable output capacitor with a low ESR (Equivalent Series Resistance) and a minimum capacitance of 10uF. Also, ensure that the input capacitor is properly sized and placed close to the VIN pin.
• What is the minimum input voltage required for the TPS61202DRCR to operate?
  The minimum input voltage required for the TPS61202DRCR to operate is 2.5V, but it's recommended to keep it above 3V for optimal performance.
• Can I use the TPS61202DRCR in a high-temperature environment?
  Yes, the TPS61202DRCR can operate in high-temperature environments, but its performance may degrade above 85°C. It's recommended to derate the output current and ensure proper thermal management to prevent overheating.
• How do I calculate the output voltage of the TPS61202DRCR?
  The output voltage of the TPS61202DRCR can be calculated using the following formula: VOUT = 0.6V x (1 + R1/R2), where R1 and R2 are the resistors connected to the FB pin.