The maximum input voltage that can be applied to the TPS61182RTER is 18V, but it's recommended to keep it below 15V for optimal performance and reliability.
To ensure the stability of the output voltage, it's essential to use a suitable output capacitor with a low ESR (Equivalent Series Resistance) and a minimum capacitance of 10uF. Additionally, the input capacitor should be placed close to the VIN pin to reduce noise and ripple.
The minimum input voltage required for the TPS61182RTER to operate is 2.5V, but it's recommended to keep it above 3V for optimal performance and to ensure the internal voltage regulator can operate correctly.
The TPS61182RTER is rated for operation up to 125°C, but it's essential to consider the thermal design and ensure proper heat dissipation to prevent overheating. A thermal pad or heat sink may be required for high-temperature applications.
The output voltage of the TPS61182RTER can be calculated using the formula: VOUT = 0.8V x (1 + RFBT/RFB) where RFBT and RFB are the feedback resistors. The output voltage can be adjusted between 0.8V and 6V by selecting the appropriate feedback resistors.
TPS61182RTER datasheet
by Texas Instruments
