The maximum input voltage that can be applied to the TPS565201DDCR is 18V, but it's recommended to keep it below 15V for optimal performance and reliability.
To ensure the stability of the output voltage, it's essential to use a suitable output capacitor with a low equivalent series resistance (ESR) and a sufficient capacitance value. A minimum capacitance of 10uF is recommended, but a higher value may be required depending on the specific application.
The TPS565201DDCR can deliver up to 2A of output current, but it's essential to ensure that the input voltage and output voltage are within the recommended operating range to avoid overheating and ensure reliable operation.
The output voltage of the TPS565201DDCR can be adjusted by using an external resistor divider network between the output pin and the ground pin. The output voltage can be calculated using the formula: Vout = 0.8V x (1 + R1/R2), where R1 and R2 are the resistors in the divider network.
The thermal shutdown temperature of the TPS565201DDCR is typically around 150°C, but it can vary depending on the specific application and operating conditions. It's essential to ensure proper thermal management to prevent overheating and ensure reliable operation.
TPS565201DDCR datasheet
by Texas Instruments
Findchips
