TPS562210DDFT datasheet by Texas Instruments

TPS562210DDFT Frequently Asked Questions (FAQs)

• What is the maximum input voltage that can be applied to the TPS562210DDFT?
  The maximum input voltage that can be applied to the TPS562210DDFT is 18V. Exceeding this voltage may damage the device.
• How do I ensure the stability of the output voltage?
  To ensure the stability of the output voltage, it is recommended to use a minimum output capacitance of 10uF and a maximum ESR of 1 ohm. Additionally, the output voltage should be decoupled from the input voltage using a capacitor with a value of at least 1uF.
• What is the maximum output current that the TPS562210DDFT can deliver?
  The maximum output current that the TPS562210DDFT can deliver is 2A. Exceeding this current may cause the device to overheat or fail.
• How do I adjust the output voltage of the TPS562210DDFT?
  The output voltage of the TPS562210DDFT can be adjusted by using a resistor divider network between the output voltage pin and the ground pin. The output voltage can be calculated using the formula: Vout = 0.8V x (R1 + R2) / R2, where R1 and R2 are the resistors in the divider network.
• What is the thermal shutdown temperature of the TPS562210DDFT?
  The thermal shutdown temperature of the TPS562210DDFT is 150°C. If the device temperature exceeds this value, it will shut down to prevent damage.