The maximum input voltage that can be applied to the TPS54618QRLBRQ1 is 6.5V. Exceeding this voltage may cause damage to the device.
To ensure stability, it is recommended to use a minimum output capacitance of 10uF and a maximum ESR of 1 ohm. Additionally, the input capacitor should be placed close to the VIN pin and the output capacitor should be placed close to the VOUT pin.
The minimum input voltage required for the TPS54618QRLBRQ1 to operate is 2.5V. However, the device may not be able to regulate the output voltage accurately below 2.7V.
The TPS54618QRLBRQ1 is rated for operation up to 125°C. However, the device's performance and reliability may be affected at high temperatures. It is recommended to derate the output current and input voltage according to the temperature derating curve in the datasheet.
The output voltage of the TPS54618QRLBRQ1 can be calculated using the following formula: VOUT = 0.8V x (1 + RFBT/RFBG). RFBT and RFBG are the resistors connected to the FB pin.
