The maximum input voltage that can be applied to the TPS54613PWP is 17V, but it's recommended to keep it below 15V for optimal performance and reliability.
To ensure stability, make sure to follow the recommended layout and component selection guidelines in the datasheet, and add a 10nF ceramic capacitor between the VIN and GND pins to filter out noise.
The minimum ESR required for the output capacitor is 5mΩ, but it's recommended to use a capacitor with an ESR of 1mΩ or less for optimal performance.
Yes, a ceramic capacitor can be used as the output capacitor, but it's recommended to use a capacitor with a high ripple current rating and a voltage rating of at least 2x the output voltage.
The output voltage of the TPS54613PWP can be adjusted by changing the resistor divider ratio between the FB and VOUT pins. Use the formula in the datasheet to calculate the required resistor values.
TPS54613PWP datasheet
by Texas Instruments
