TPS54260DRCR datasheet by Texas Instruments

TPS54260DRCR Frequently Asked Questions (FAQs)

• What is the maximum input voltage that can be applied to the TPS54260DRCR?
  The maximum input voltage that can be applied to the TPS54260DRCR is 42V, but it's recommended to keep it below 40V for reliable operation.
• How do I ensure the stability of the output voltage?
  To ensure the stability of the output voltage, make sure to use a suitable output capacitor with a low ESR (Equivalent Series Resistance) and a sufficient capacitance value, as recommended in the datasheet.
• What is the purpose of the EN pin, and how do I use it?
  The EN (Enable) pin is used to turn the regulator on or off. To use it, connect it to a logic-level signal (e.g., from a microcontroller) to enable or disable the regulator. When EN is high, the regulator is enabled, and when EN is low, the regulator is disabled.
• How do I calculate the output voltage of the TPS54260DRCR?
  The output voltage of the TPS54260DRCR can be calculated using the formula: Vout = (R1 / R2) * 0.8V, where R1 and R2 are the resistors connected to the FB (Feedback) pin.
• What is the maximum output current that the TPS54260DRCR can deliver?
  The maximum output current that the TPS54260DRCR can deliver is 2A, but it's recommended to keep it below 1.5A for reliable operation and to avoid overheating.