TPS54010PWPRG4 datasheet by Texas Instruments

TPS54010PWPRG4 Frequently Asked Questions (FAQs)

• What is the maximum input voltage that can be applied to the TPS54010PWPRG4?
  The maximum input voltage that can be applied to the TPS54010PWPRG4 is 60V, but it's recommended to keep it below 50V for reliable operation.
• How do I calculate the output voltage of the TPS54010PWPRG4?
  The output voltage of the TPS54010PWPRG4 can be calculated using the formula: Vout = 0.8V x (1 + R2/R1), where R1 and R2 are the resistors connected to the FB pin.
• What is the minimum input voltage required for the TPS54010PWPRG4 to operate?
  The minimum input voltage required for the TPS54010PWPRG4 to operate is 4.5V, but it's recommended to keep it above 5V for reliable operation.
• Can I use the TPS54010PWPRG4 in a high-temperature environment?
  Yes, the TPS54010PWPRG4 can operate in a high-temperature environment up to 150°C, but the maximum junction temperature should not exceed 125°C.
• How do I ensure the stability of the TPS54010PWPRG4 output voltage?
  To ensure the stability of the TPS54010PWPRG4 output voltage, it's recommended to use a minimum output capacitance of 10uF and a maximum ESR of 1 ohm.