The recommended layout and placement for the TPS3808G33DBVRG4 involves placing the device close to the power source, using a solid ground plane, and keeping the input and output capacitors close to the device. Additionally, it is recommended to use a 4-layer PCB with a dedicated power plane and a dedicated ground plane to minimize noise and ensure optimal performance.
The choice of input and output capacitors for the TPS3808G33DBVRG4 depends on the specific application requirements. In general, it is recommended to use low-ESR capacitors with a capacitance value of 10uF to 22uF for the input capacitor and 10uF to 47uF for the output capacitor. The capacitor selection should also consider the voltage rating, temperature range, and ripple current rating.
The maximum ambient temperature range for the TPS3808G33DBVRG4 is -40°C to 125°C. However, the device can operate at a junction temperature of up to 150°C. It is recommended to ensure that the device is operated within the specified temperature range to ensure optimal performance and reliability.
To ensure proper thermal management of the TPS3808G33DBVRG4, it is recommended to provide adequate heat sinking, such as a thermal pad or a heat sink, to dissipate heat generated by the device. Additionally, it is recommended to ensure good airflow around the device and to avoid blocking the airflow around the device.
The recommended input voltage range for the TPS3808G33DBVRG4 is 2.7V to 5.5V. Operating the device outside of this range may affect its performance and reliability.
TPS3808G33DBVRG4 datasheet
by Texas Instruments
Findchips
